Dosimetry of fast neutrons in 1W nuclear reactor with plastic nuclear-track detectors

A nuclear reactor at Kinki University is operated at the maximum of 1W. It produces fission neutrons as much as gamma-rays. To facilitate its use for neutron radiobiology, fast neutrons inside the reactor were measured with nuclear-track detectors TS 16 N and a pair of ion chambers. The angular dependence of TS 16 N response, an anisotropy of fast neutron fluxes in the reactor and misuse of the kerma factor assumed for radiation protection business are the major causes of discrepancy is measured doses by the two methods. Correction factors for the three causes are proposed. After correction, neutron doses estimated with TS 16 N and chambers agree within 5%. The dose-rate at the reactor's center is about 20 tissue-cGy/h. This is the first in situ dosimetry of fast neutrons in a reactor with track detectors attached to biologic samples. Our routine usage has demonstrated that, if used with caution, TS 16 N elements are handy, reliable monitors for fast neutron dosimetry as they are insensitive to contaminated gamma-rays and small enough to be attached to biologic samples.     

Preparation and photochromism of diarylethene covalently bonded onto layered sodium-magadiite surfaces

Diarylethene derivatives (DE) covalently bonded to silanol oxygens of layered silicate surfaces, i.e., magadiite (Mag), were synthesized and investigated for their photochromic behavior. The DE-Mag layered hybrids were found to undergo reversible color change by alternating UV and visible light irradiation. A more highly efficient, reproducible photochromic behavior was realized with DE-Mag than with a corresponding DE-Si possessing silyl substituents on DE in place of the Mag surface. Moreover, the present covalently bonded DE exhibited an improvement over DE hybrids incorporated in layered double hydroxide (LDH) clays, in which the repetitive photochromic behavior decreased during alternating irradiation, due to the accumulation of the photochemically inert parallel isomers of DE.     

Photoinduced face-inversion of conjugated tetraene ligands on a Pd-Pd-Pd moiety

The linear sandwich tripalladium complexes [Pd3{Ar(CH=CH)4Ar}2[BArf]2 (Ar = Ph, p-t-Bu-C6H4, p-styryl-C6H4) undergo photoinduced isomerization involving face-inversion of the tetraene ligands. Irradiation of these complexes with visible light (>510 nm) resulted in rac (staggered sandwich) to meso (eclipsed sandwich) isomerization. The structures of rac and meso isomers are determined by X-ray crystallographic analyses.     

Upward temperature shift of the intrinsic phase lag of the magnetization of Bis(phthalocyaninato)terbium by ligand oxidation creating an S = 1/2 spin

An alternating-current (ac) magnetic susceptibility measurement for the [(Pc)(2)Tb(III)](0) complex (Pc = phthalocyaninato) has shown that ligand oxidation of the anionic [(Pc)(2)Tb(III)](-) complex gives rise to a significant upward shift of the temperature range where the magnetization response shows a phase lag behind the time-varying external magnetic field. The peaks of the out-of-phase component of the ac susceptibility of the pi-radical [(Pc)(2)Tb(III)](0) were observed at 50, 43, and 36 K with ac magnetic fields of 10(3), 10(2), and 10 Hz, respectively, which were more than 10 K higher than the corresponding values of the anionic complex with a closed-shell pi-system. The ac susceptibility measurements on the complex with octa(dodecoxy)-substituted Pc ligand, which is readily dilutable in diamagnetic media, proved that the significant rise of the temperatures occurs as an intrinsic single-molecular property of the complex possessing both J = 6 and S = (1)/(2) systems, and is not due to long-range magnetic order or interactions between adjacent unpaired pi-electrons.     

Self-assembly patterning of colloidal crystals constructed from opal structure or NaCl structure

We developed a novel self-assembly process to fabricate an orderly array of particle wires constructed from a close-packed colloidal crystal without preparation of patterned templates. A substrate was immersed vertically into a SiO2 colloidal solution, and the liquid surface moved downward upon evaporation of solution. Particles formed a mono-/multiparticle layer, which was cut by the periodic drop-off of solution. The orderly array of particle wires was successfully fabricated, showing the suitability of the self-assembly process for the fabrication of nano-/microstructures constructed from nano-/microparticles or blocks. The mechanism of the assembly process and control of thickness, width, and interval of particle wires were further discussed. Moreover, an array of particle wires constructed not from close-packed face-centered cubic (or hexagonal close packed) structure but from two kinds of particles was realized to fabricate an array of particle wires with NaCl structure by this self-assembly process.     

Development of direct fluorination technology for application to materials for lithium battery

Direct fluorination of 1,3-dioxolan-2-one with elemental fluorine was successfully carried out to provide 4-fluoro-1,3-dioxolan-2-one, which was expected as an additive for lithium ion secondary battery. 4-Fluoro-1,3-dioxolan-2-one was also further fluorinated with elemental fluorine to give three isomers of difluoro derivatives by the same methodology. Another topic is the preparation of trifluoromethanesulfonyl fluoride, an intermediate of lithium battery electrolyte, by the reaction of methanesulfonyl fluoride with elemental fluorine. The use of perfluoro-2-methylpentane as a solvent gave satisfactory selectivity of trifluoromethanesulfonyl fluoride.     

The hydrophilization of polystyrene substrates by 172-nm vacuum ultraviolet light

This paper describes the photochemical surface modification of polystyrene (PS) substrates using vacuum ultraviolet (VUV) light 172 nm in wavelength. We have particularly focused on the effects of atmospheric pressure during VUV irradiation on the obtained surface's wettability and the stability of the wettability, in addition to its chemical structure, morphology, and photooxidation rate. Samples were photoirradiated with VUV light under pressures of 10, 10(3), or 10(5) Pa. Although, in each case, the originally hydrophobic PS surface became highly hydrophilic, the final water-contact angle and photooxidation rate depended on the atmospheric pressure. The samples treated at 10 Pa were less wettable than those prepared at 10(3) and 10(5) Pa due to the shortage of oxygen molecules in the atmosphere. The minimum water-contact angles of the samples treated at 10, 10(3), and 10(5) Pa were about 8 degrees, 0 degrees, and 0 degrees, respectively. With the samples prepared at 10 and 10(3) Pa, photooxidation reactions proceeded in the topmost region closest to the surface, while at 10(5) Pa photooxidation was found to be greatly enhanced in the deeper regions, as evidenced by angle-resolved X-ray photoelectron spectroscopy. Photoetching rates were determined through atomic force microscope observation of microstructured PS samples prepared by a simple mesh-contact method. As estimated from AFM images of the latticed microstructures obtained, the rates of samples prepared at 10(3) and 10(5) Pa were about 1.5 and 1.3 nm/min, respectively. However, no photoetched features were observable on the sample surface prepared at 10 Pa. Hydrophilic stability also varied greatly depending on atmospheric pressure. The hydrophilicity of samples treated at 10 and 10(3) Pa gradually decreased as they were exposed to air. On the other hand, the sample surface prepared at 10(5) Pa showed excellent hydrophilicity even after being left in air for 30 days.     

Reversible color changes in lamella hybrids of poly(diacetylenecarboxylates) incorporated in layered double hydroxide nanosheets

The present study is an investigation of a reversible thermal color change induced in lamella hybrids of poly(diacetylenecarboxylates) incorporated in layered double hydroxide (LDH) nanosheets. These poly-[m,n]/LDH hybrids prepared by the photo- or gamma-ray-induced polymerization of diacetylenecarboxylates, i.e., CH(3)(CH(2))(m)()(-)(1)CC-CC(CH(2))(n)()(-)(1)CO(2)(-) (mono-[m,n]), and intercalated in LDH lamella sheets, were observed to develop colors ranging from yellow to blue. The change in color was found to depend greatly on the alkyl carbon numbers of the mono-[m,n] (m,n = 10,11; 5,11; 10,5; 16,1) values. Moreover, the conformational alignment of the mono-[m,n] within the LDH was observed to be a crucial factor in color development, which was greatly affected by the intercalation degrees and extent of poly(ene-yne) linkage elongation of the polymers. For the poly-[m,n]/LDH hybrids investigated, a reversible color change was found to occur repeatedly and remarkably for the poly-[10,11]/LDH hybrid. This color change occurred at temperatures between ca. 20 and 80 degrees C back and forth from purple red to bright orange, in stark contrast to the irreversible color change for poly-[10,11] without LDH. Moreover, DSC and Raman spectroscopic studies of the LDH hybrids showed that the thermochromic temperature corresponded to the phase transition temperature of 80 degrees C. XRD analysis also indicated that the poly-[m,n]/LDH hybrid could retain its lamella structure during such thermochromic color changes, enabling conformational recovery in the polymer chains by a cooling down of the hybrids to temperatures lower than the transition temperature, while the nonhybrid poly-[10,11] powders exhibited an irreversible color change at 60 degrees C, above which the polymer powder turned amorphous.     

Studien Über die Saponine aus der Arznei-Ginseng-Wurzel: Massenspektren von Ginsenoside-Rg1-Decaacetat und Verwandten Verbindungen

Mass spectra of ginsenoside-Rg1 deca-acetate

1 Siehe Lit.2.

and the related dammaran-type triterpene saponin acetates have been studied and a comment is given on the structure of panaxoside A (=ginsenoside-Rg1) proposed by Elyakov, et al .     

NMR and MO Studies on the Molecular Structure of a Fluoranthene-Benzene Complex

Summary. Fluoranthene (FA) forms a 1:1 van der Waals complex with benzene in cyclohexane. The ¹H NMR spectrum of this complex shows that the FA moiety in the complex state has five kinds of hydrogen atoms and that the ¹H NMR peaks assigned to the protons attached to the naphthalene skeleton are largely shifted to higher magnetic field on complex formation with benzene. These observations indicate that the complex takes the structure of C_S symmetry, in which the benzene molecule mainly interacts with the electronic system localized on the naphthalene moiety of FA. The present ab initio calculations reproduce well the ¹H NMR spectral shifts mentioned above and the experimentally predicted C_S structure of the complex. According to the PPP calculations for the electronic absorption spectral changes on the complex formation, the FA-benzene complex is considered to take a sandwich type structure.